5000FK – Unassembled FRAME ONLY KIT – ReliaBuild 3D Next Generation Frame

  • RB3VirtualPic
  • 4E3D Next Generation Printer
  • 4E3D Next Generation Printer
  • 4E3D Next Generation Printer
  • Basic Rigidbot 1 Electronics Upgrade Kit
  • Basic Rigidbot 1 Electronics Upgrade Kit
  • Basic Rigidbot 1 Electronics Upgrade Kit

5000FK – Unassembled FRAME ONLY KIT – ReliaBuild 3D Next Generation Frame

$549.00

This printer is the next generation of 3d Printer, building upon the Rigidbot frame and new electronics to create the most desirable large build plate printer available on the market today.

With all the Rigid features of the original RB1 and RBB but the best of the ne

Categories: ,

Product Description

Part No. 5000FK

The unassembled FRAME KIT for a Regular 10 x 10 x 10 ReliaBuild 3D printer comes with everything the assembled printer includes (Except Electronics) but you get the pleasure of building it yourself and customizing to your pleasure!

The full description of the assembled printer is below:

This printer is the next generation of 3d Printer, building upon the Rigidbot frame and new electronics to create the most desirable large build plate printer available on the market today. (10 x 10 x 10 inches standard)

RB3
Part Number Description Length Qty
1011 NEW! Extruded Aluminum Bars – Bottom Front, Top Front, Top Back 17″ 3
1012 NEW! Extruded Aluminum Bars – Bottom Left and Right 15″ 2
1014 NEW! Extruded Aluminum Bars – Vertical Build Riser (10″ Build height) 12.5″ 4
1015 NEW! Extruded Aluminum Bars – Short Base Riser 2.5″ 4
1016NEW! Extruded Aluminum Bars – Middle Front and Back 17″ 2
1017 NEW! Extruded Aluminum Bars – Middle Left and Right 15″ 2
1019 NEW! Extruded Aluminum Bars – Top Left and Right 15″ 2
1020 NEW! Extruded Aluminum Bars -Left and Right X Gantry Mounts 7.5″ 2

1022 X Rods 17 -1/8″ 2
1023 Y Rods 16 -5/8″ 2
1024 Z Rods (10″ Build height) 13 -5/16″ 4

Build Plate (10″ x 10″) 11″ x 11″ 1
Bed Carriage 11″ x 4.5″ 1

Blue Acrylic “ReliaBuild3d” Front Acrylic Plate with LCD Cutout

Aluminum Backplate with cutouts for Power Supply and Mainboard Mounting

Z Steppers Threaded Rod (10″ Build height) 11 -3/4″ 2

Spooler Rod 16 -1/2″ 1
Notched Spooler Rod Holder 7″ 2

Knuckles  12
Rod holders  16
3D Printed Feet  4

M3 Bolts – 5mm long (Bed PCB)  5
M3 Bolts – 8mm long (Hardware)  70
M3 Bolts – 14mm long (Main Board)  7
M3 Bolts – 22mm long (Bed Level, Hot end)  5
M3 Bolts – 30mm long (Extruder heat Sink)  2

M4 Bolts – 8mm long (Frame)  117

All printed parts
https://www.thingiverse.com/thing:2417781

 

Additional Information

Weight 45 lbs
Dimensions 25 x 25 x 25 in